[Zooomr RSS Reader] puts Zooomr on your Facebook page and now [Zooomr Widgets] allow you to put all your awesome photos on your blog!!
Three options available:
All Zipline Activity
<script
type=”text/javascript”
src=”http://www.zooomr.com/zipline/widget/USERNAME”>
</script>
Photos Only
<script
type=”text/javascript”
src=”http://www.zooomr.com/zipline/widget/USERNAME?acat=1″>
</script>
Chat Only
<script
type=”text/javascript”
src=”http://www.zooomr.com/zipline/widget/USERNAME?acat=18″>
</script>
If you’re using this in the K2 theme you probably need so reset the <h2> declaration using some custom css styling (you can do this from the K2 options page). Mine looks like this:
.secondary h2 {
font-size: 1.5em;
margin: .75em 0;
}
wordpress, zooomr, zooomr widgets
Published on Wednesday, May 21, 2008 .
Orange is a stupid word. It can be a name, a colour and a taste. How confusing is that!? Sort this out dictionary types!
Published on Thursday, May 15, 2008 .
Can someone please buy me this t-shirt?

Kate Beaton, Reading is Crazy, t shirt
AKA: Xecuter modchip installation
AKA: Installing XBMC on your Xbox
My Xbox (original one) has spent the last two months in pieces. This is due, in no small part, to my inability to solder stuff on to a PCB, and also my inability to solder very well at all.
Still it’s all done now so I thought I’d give a quick rundown as to how it all went.
First off it’s important to point out that this is for a hardware mod, if you Xbox still works then you can try a [softmod] rather than taking it all apart, but I don’t know much/anything about that.
What you need:
- Xecuter3 modchip - get it from the [ModChip Store]
- Some Torx screwdrivers (T20, T15, T10) - get them at Halfords or Maplins
- 7W soldering iron + solder + a fine tip for the soldering iron + a multimeter for testing your connections! Also if you haven’t soldered for a while/ever buy a little [build it yourself kit from Maplin] too so you can practice
OK so here we go:
- Take your Xbox apart using this lovely guide at [xbox-modchips]
- Now follow this fantastic guide from [Modchip.com on how to install your Xecuter 3 CE]. If you haven’t soldered before/for a while I would have a bit of a practice on the kits that you got from Maplins, cos you’re going to have to do it real good on the Xbox.
- Right so now it’s installed and when you boot you get the [Flashbios screen]
- OK so now you need to install a BIOS on your chip, use the link above to learn how to flash via HTTP
- Right so you’re all learned up, now you need to get a BIOS (I’d recommend the Xecuter BIOS) lets go though the steps to get a BIOS:
- OK so now you need to UnRar the bios to get a .bin file (find a RAR program for you operating system from Google)
- Now use the HTTP flash method that you learned a few steps earlier to flash the BIOS - if you get an error use the page above - my modchip had the write protect labeled backwards
- OK I’m going to assume that step has all gone to plan and now when you turn the Xbox on you see the “Xecuter rocks my box” written under the large green glowing X and you get dumped to a config screen for the Xecuter BIOS
- The IP address should be in the bottom left. FTP to that address with the username and password x3
- If you’re doing this because you’ve replaced your Xbox hard drive then choose the Disk option and get Xecuter to partition it
- So now on to installing XBMC - I would recommend [installing it as a dashboard]. If you’re using a blank hard drive name the .xbe and .cfg as xbmc.cfg and xbmc.xbe
- You’re probably wondering where to get XMBC from now that you’ve got the dashboard and you get it from [T3CH]
- Now using the Xecuter FTP server you can [install XBMC via FTP]
- Once that’s done then choose “Reboot to Dash” from the menu and enjoy XBMC!
modding, xbmx, xbox, xecuter, xecuter3ce
Latest Comments
RSSJim Davis, eeek, Zooomr adds better photo licencing!! at bluemonki dot net
Bookmarks about Geotag, John Wesley, Wolfman-K, John Wesley, yanz
Gary Grady, jonh, Gary Grady, jonh, Devan, greg, Jay, jonh, Lucas
jonh, Marc
jonh, simon
jonh, simon